 |
Series 2000 Synthetic Racing Grease, NLGI #2,
GC/LB Ultimate protection for hard-driven,
high performance vehicles. Dramatically reduces friction and wear for improved
performance. Excels at both high- and low-temperature performance. Outperforms
other conventional and synthetic greases.

Package sizes include:
14-oz. Cartridge 14-oz. Cartridges (case of 10) 14-oz.
Cartridges (case of 40) 35-lb. Lug 120-lb.
Keg |
Applications AMSOIL
Series 2000 Synthetic Lithium Complex Racing Grease meets the highest
performance standards of the National Lubricating Grease Institute, GC for wheel
bearing applications and LB for chassis applications.
Load Capacity AMSOIL
Series 2000 Racing Grease is an extreme-pressure multi-purpose grease formulated
for high-temperature/high-speed applications. Yet, it excels in the protection
of low-speed bearings, a job usually reserved for heavy-duty products.
Components get the load bearing capacity of a heavy-duty grease without
sacrificing the high-temperature protection of a multi-purpose.
Anti-Wear
Performance AMSOIL Series 2000 Racing Grease passes
the Ford Film Strength Endurance Test with a 16 point margin (see graph). Most
nonsolid-fortified racing greases, synthetic or conventional, do not pass.
AMSOIL Series 2000 Racing Grease keeps greased components in like-new
condition.
All-Temperature Protection AMSOIL Series 2000 Racing Grease pairs a high Viscosity Index synthetic
base oil with a top-quality lithium complex thickener, known for its
extraordinary performance in temperature extremes. AMSOIL Series 2000 Racing
Grease offers excellent low-temperature pumpability and high-temperature
consistency for dependable all-temperature protection.
Oxidation Resistance and
Inhibition AMSOIL Series 2000 Racing Grease’s
excellent oxidation resistance and robust package of oxidation inhibitors
prevent grease breakdown and component surface damage in the highly oxidizing
conditions associated with high temperature operations.
Friction Reduction AMSOIL Series 2000 Racing Grease maximizes power through-put and fuel
efficiency by minimizing friction. The extra power given by Series 2000 improves
acceleration and top-end speed.
Washout Resistance and Corrosion
Inhibition AMSOIL Series 2000 Racing Grease resists
water wash out and inhibits rust and other forms of corrosion.
| Typical Technical Properties |
| AMSOIL Synthetic
Lithium Complex Racing Grease |
NLGI GC-LB |
Series 2000 Racing
Grease |
| Thickener |
NR* |
Lithium
Complex |
| NLGI Consistency Grade |
NR* |
2 EP |
| NLGI Performance Grade |
NR* |
GC-LB |
| Penetration (ASTM D-217) 25° C [77° F],
0.1 mm Worked 60 strokes |
220 - 340 |
265 - 295 |
| Dropping Point (ASTM D-566) °C [77°
F] |
220 [428] |
285 [545] |
| Water Washout (ASTM D-1264) 79° C [175°
F] % loss |
15 max |
5.1 |
| Oil Separation (ASTM D-1742) 24 hr. @ 25°
C [77° F], % loss |
10 max |
2.8 |
| Rust Protection (ASTM D-1743) |
pass |
pass |
| Timken OK Load Test (ASTM D-2509),
lbs. |
NR* |
60 |
| Fortified with Moly Compound |
NR* |
no |
| Four Ball Wear Test (ASTM D-2266) Wear
Scar Diameter, mm |
0.9 max |
0.32 |
| Compatibility with other
greases |
NR* |
excellent |
| Extreme Pressure, Four Ball Method (ASTM
D-2596) Weld Point, kgf |
200 min |
400 |
| Extreme Pressure, Four Ball Method (ASTM
D-2596) Load Wear Index, kgf |
30 min |
65 |
| High Temperature Life (ASTM D-3527)
hours |
80 min |
300 |
| Fretting Wear (ASTM D-4170)*
mg |
10 max |
3.4 |
| Elastomer Compatibility (ASTM D-4289)
Volume Change, %, GC |
-5 to +30 |
21.6 |
| Elastomer Compatibility (ASTM D-4289)
Volume Change, %, LB |
0 to +30 |
9.88 |
| Elastomer Compatibility (ASTM D-4289)
Hardness Change, durometer-A points, GC |
+2 to -15 |
-3 |
| Elastomer Compatibility (ASTM D-4289)
Hardness Change, durometer-A points, LB |
0 to -10 |
-6 |
| Leakage (ASTM D-4290), G* |
10 max |
6.0 |
| Low Temperature Torque (ASTM D-4693) n·m,
max @ -40° C [-40° F] |
15.5 |
2.3 |
| Water Spray Off (ASTM D-4049), %
max |
NR* |
22.7 |
| * NR: Not Required for NLGI GC
or LB
labeling | |